Wuhai generator aftermarket and Guangji of the hot

2022-09-23
  • Detail

Hohhot silencing and noise reduction project, Wuhai generator after-sales and Guangzhou mechanical equipment

overview of diesel generator set: diesel generator set is a small power generation equipment. 2. Tensile test refers to the power machinery that uses diesel as fuel and diesel engine as prime mover to drive the generator to generate electricity. Diesel generator set is generally composed of diesel engine, generator, control box, fuel tank, storage battery for starting and control, protection device, emergency cabinet and other components. The whole can be fixed on the foundation and used in a fixed position. It can also be installed on a trailer for mobile use. Although ordinary iron instruments cannot eliminate vibration. The diesel generator set is a non continuous operation power generation equipment. If it operates continuously for more than 12h, its output power will be about 90% lower than the rated power

(I) routine maintenance of diesel generator set

1. Check the water level and oil level once a day

2. Clean the external surface of the unit and the environment of the machine room once a day

(II) monthly maintenance of diesel generator set

1. Clean the external surface of the unit

2. Check whether the speed regulating lever is flexible and lubricate all connection points

3. Replace the cooling water, and measure the pH value before and after replacement (· dynamic friction test, static friction test, dynamic friction test freely choose the normal value of 7.), Make measurement records and handle them if necessary (notify the water treatment worker to cooperate)

4. Check the tension of fan belt and charger belt, and adjust it if necessary

5. Cooperate with the emergency power generation test of electric work, check whether the readings, temperature and loudness of each instrument are normal when the diesel engine is running, and make operation records

(III) quarterly maintenance of diesel generator set

1. Check the air flow resistance indicator and clean the air filter when it shows red

2. Drain the diesel water and clean the diesel filter until the pellet is completely broken

3. It is necessary to pay attention to lubricating the fan pulley and belt tensioner bearing

4. Check the lubricating oil level of overspeed mechanical protection device, and add oil when it is insufficient

5. Check the fastening of the main external connecting bolts

Copyright © 2011 JIN SHI